3-045-457-21 (1)
Portable
CD Player
Operating Instructions
About the area code
The area code of the location in which you purchased the CD player
is shown on upper left of the bar code label on the package.
For accessories supplied with your CD player, check the area code
of your model and see “Accessories (supplied/optional).”
D-E880
D-EJ815
1999 Sony Corporation
Table of Contents
Connecting a power source
Getting started
Using the rechargeable batteries ................ 18
Using dry batteries..................................... 20
Locating the Controls .................................. 4
Using the battery case
(for the customers supplied with the
battery case) .......................................... 20
Playing a CD
1. Connect your CD player. ......................... 7
2. Insert a CD. ............................................. 7
3. Play a CD. ............................................... 8
Notes on the power source ........................ 21
Using the carrying case
(for the customers supplied with the
battery case) .......................................... 21
Playback options
Additional information
Playing tracks repeatedly (Repeat play) .... 11
Playing a single track (Single play) ........... 11
Precautions ................................................ 22
Maintenance .............................................. 22
Troubleshooting ......................................... 23
Specifications ............................................ 25
Accessories (supplied/optional) ................ 26
Playing tracks in random order
(Shuffle play)......................................... 11
Playing tracks in your favorite order
(PGM play)............................................ 12
Available features
G-PROTECTION function ........................ 13
Emphasizing the bass sound (SOUND) .... 13
Protecting your hearing (AVLS) ................ 14
Locking the controls (HOLD) ................... 14
Turning off the operation beep sound........ 15
Turning off the LCD’s backlight ............... 15
Connecting your CD player
Connecting a stereo system ....................... 16
Using your CD player in a car ................... 17
3
Getting started
Locating the Controls
For details, see pages in parentheses.
CD player (front)
1 Display
8 u (play/pause)
button
(pages 9, 11 - 15)
(pages 8, 12)
9 x (stop)/CHG (charge)
button
2 ./>
(AMS/search)
buttons
(pages 8, 15, 18)
(pages 8, 11, 12)
q; EXT BATT
(external battery)/
DC IN 4.5 V
3 PLAY MODE
button
(pages 10 - 12)
(external power
input) jack
(pages 7, 18, 20)
4 HOLD switch
(page 14)
qa LINE OUT
(OPTICAL) jack
(page 16)
5 OPEN switch
(page 7)
6 REPEAT/ENTER
button
qs i/REMOTE jack
(page 7)
(pages 10 - 12)
7 SOUND button
qd VOLUME +/–
buttons
(page 13)
(page 8)
CD player (rear)
qf Battery compartment
qg AVLS switch
(page 18)
(page 14)
4
Remote control (not supplied with the CA model)
(Front)
qh HOLD switch
ql Display
(pages 9, 11 - 15)
(page 14)
w; LIGHT button
Press to illuminate the
display on the remote
control for about 5 seconds
when using the player on
the rechargeable batteries
or alkaline batteries.
qj x (stop) button
(pages 8, 15)
qk Jog lever
u: play/pause (pages 8, 12)
./>: AMS/search (pages 8, 11, 12)
Press or slide the lever to operate your CD
player.
wa VOLUME +/–
tab (page 8)
(Rear)
ws P (play) MODE button
wg SOUND button
(pages 10 - 12)
(page 13)
wh DISPLAY button
Press to check the remaining time on the
CD and the number of the tracks left.
wd RPT (repeat)/ENT
(enter) button
(pages 10 - 12)
wf Clip
You can turn and
change the angle of the
clip.
Note
Use only the supplied remote control. You cannot
operate this CD player with the remote control
supplied with other CD players.
(Continued)
5
Remote control (supplied with the CA model)
wj x (stop) button
wl N(play)•>
(AMS/search)
button
(pages 8, 15)
(pages 8, 11, 12)
wk VOL (volume)
+/– button
e; HOLD switch
(page 14)
(page 8)
ea .(AMS/
search) button
(pages 8, 11, 12)
Note
Use only the supplied remote control. You cannot operate this CD player with the remote control supplied with
other CD players.
6
Playing a CD
You can also use rechargeable batteries, dry batteries and a car battery as a power source.
1. Connect your CD player.
to an AC outlet
1 Connect the AC power adaptor.
2 Connect the headphones/earphones
with remote control.
AC power
adaptor
For models supplied with the AC plug
adaptor
If the AC power adaptor does not fit the AC
outlet, use the AC plug adaptor.
u button
For models supplied with the remote
control.
to EXT
BATT/DC
IN 4.5V
• Connect the plug of the headphones/
earphones to the remote control.
• Connect the headphones/earphones to
the remote control firmly. A loose
connection may cause noise during
playback.
Headphones
or
Earphones
to i/
REMOTE
2. Insert a CD.
1 Slide OPEN to open the CD
2 Place the CD on the tray and close
player lid.
the lid.
OPEN switch
Label side up
(Continued)
7
3. Play a CD.
Press u.
Adjust the volume by
pressing VOLUME + or –.
To
Press
Play/Pause
u
x/CHG*2
Stop
Find the beginning of the current track (AMS*1)
Find the beginning of the previous tracks (AMS)
Find the beginning of the next track (AMS)
Find the beginning of the succeeding tracks (AMS)
Go backwards quickly
.once quickly*2
.repeatedly*2
> once quickly*2
> repeatedly*2
Hold down .*2
Hold down >*2
Go forward quickly
*1 Automatic Music Sensor
*2 These operations can be done during both play and pause.
8
About the display
• When you press u after changing the CD or turning off and on the player, the total number
of tracks in the CD and total playing time appear for about two seconds.
• During play, the track number and the elapsed playing time of the current track appear.
• Between tracks, the time to the beginning of the next track appears with the “–” indication.
• During pause, the elapsed playing time flashes.
If the volume level does not increase
Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing
(AVLS).”
Playback starts from the point you stopped
Your CD player can recall the playback point where you stopped and then resume playing from
the same place (resume function). There is no ON/OFF switch of the resume function on this CD
player.
Removing the CD
Remove the CD as illustrated below.
Dent
9
Playback options
You can enjoy various ways of playback using PLAY MODE and REPEAT/ENTER.
PLAY MODE button
Each time you press the button, you can
change the playback mode.
“ No indication”
(Normal play)
“ 1”
(Play a single track)
REPEAT/ENTER button
“ SHUF”
REPEAT
(Play tracks in random order)
You can repeat play that is selected using
PLAY MODE.
“ PGM”
(Play tracks in your favorite order)
ENTER
You can select tracks for PGM play
mode.
u button
./>
buttons
x/CHG button
10
Playing tracks repeatedly (Repeat play)
You can play tracks repeatedly in normal, single, shuffle and PGM play modes.
During playback, press REPEAT/ENTER.
Note on ./>
During Repeat play, you can locate the first track after the last track by pressing > repeatedly.
You can also locate the last track after first track by pressing . repeatedly.
Playing a single track (Single play)
During playback, press PLAY MODE
repeatedly until “1” appears.
Playing tracks in random order (Shuffle play)
During playback, press PLAY MODE
repeatedly until “SHUF” appears.
11
Playing tracks in your favorite order (PGM play)
You can program the CD player to play up to 64 tracks in your favorite order.
During playback, press PLAY MODE
repeatedly until “PGM” appears.
1
Press . or > to select a track.
2
Track number
Playing order
Press REPEAT/ENTER to enter
the selected track.
3
“00” appears and the playing order increases
by one.
Repeat steps 2 and 3 to select the tracks in your favorite order.
4
Press u to start the PGM play.
5
To check the program
During programming:
Press REPEAT/ENTER repeatedly before step 5.
During the PGM play:
Press PLAY MODE repeatedly until “PGM” flashes, then press REPEAT/ENTER.
Each time you press REPEAT/ENTER, the track number appears.
Notes
• When you finish entering the 64th track in step 3, the first selected track appears in the display.
• If you select more than 64 tracks, the first selected tracks are erased.
12
B Available features
G-PROTECTION
function
Emphasizing the bass
sound (SOUND)
The G-PROTECTION function has been
developed to provide excellent protection
against sound skipping while jogging. This
function provides a higher level of shock
protection than the traditional one.
While jogging, be sure to hold your CD
player with the OPEN switch facing upward.
There is no ON/OFF switch of the
You can emphasize the bass-boosted sound.
Press SOUND to select “BASS
“BASS .”
” or
“ No indication”
(Normal play)
BASS
BASS
G-PROTECTION function on this CD player
and its remote control.
Notes
• Sound may skip if:
– the CD player receives stronger continuous
shock than expected or
The selected sound mode is displayed.
– a dirty or scratched CD is played.
• If you connect the connecting cord or the digital
connecting cord to the LINE OUT(OPTICAL)
jack, the G-PROTECTION function does not
work.
“BASS
” enhances the bass sound
”.
more than “BASS
Note
If the sound is distorted when using the SOUND
function, turn down the volume.
13
Protecting your hearing
Locking the controls
(AVLS)
(HOLD)
The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to protect your hearing.
You can lock the controls on your CD player
to prevent accidental button presses.
Slide HOLD in the direction of the
arrow.
Set AVLS to “LIMIT.”
Flashes when the volume is turned up
and beyond a certain level.
Displayed when the
HOLD function is
working.
To turn off the AVLS function
Set AVLS to “NORM.”
You can use the HOLD function with both
the CD player and remote control. You can
still operate your CD player using the remote
control when HOLD on the remote control is
set to off.
To unlock the controls
Slide HOLD in the opposite direction of the
arrow.
14
Turning off the
Turning off the LCD’s
backlight
operation beep sound
You can turn off the beep sound that is heard
from your headphones/earphones when you
operate your CD player.
While you are using the rechargeable
batteries or dry batteries, the LCD’s
backlight turns on for about 5 seconds every
time you press a button. However, you can
turn off the backlight to save the battery
power.
Remove the power source (AC
1
power adaptor, rechargeable
batteries or dry batteries) from the
CD player.
Remove the rechargeable
batteries or dry batteries from the
CD player.
1
Connect the power source while
pressing x/CHG.
2
Insert the batteries while pressing
PLAY MODE.
2
To turn on the beep sound
Remove the power source and then connect
the power source without pressing x/CHG.
To turn on the LCD’s backlight
Remove the batteries and then insert the
batteries without pressing PLAY MODE.
About the LCD’s backlight
The LCD’s backlight is always turned on
when using the AC power adaptor or car
battery.
15
B Connecting your CD player
Notes
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape and
a MiniDisc. For details, see the instruction
manual that comes with the connected
device.
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
Be sure to turn off all connected devices
before making connections.
When using the connecting cord
• You cannot adjust the volume of the
headphones/earphones on the CD player or
the remote control.
• If the sound is distorted, connect the device
to the i/REMOTE jack.
to LINE OUT
(OPTICAL)
When using the optical digital
connecting cord
To record a CD on a MiniDisc, DAT, etc.,
make sure that the CD player is in pause
before operating the recording procedures.
About the G-PROTECTION and
SOUND functions when using the
connecting cord or optical digital
connecting cord
See the following table for valid functions
according to the types of connecting cord:
Connecting
cord
Optical
digital
G-PROTECTION SOUND
Left (white)
Right (red)
connecting
cord
Connecting cord
No
No
No
Optical digital
connecting cord
Yes*
* Functions only on the output sound from the
i/REMOTE jack; does not function on the
output sound from the LINE OUT (OPTICAL)
jack.
Stereo system,
MiniDisc
recorder, DAT
deck, etc.
cassette recorder,
radio cassette
recorder, etc.
16
Using your CD player in
a car
You can use your CD player in a car by
connecting it to the car cassette deck.
You cannot use the car mount plate for this
CD player.
When you use your CD player in a car,
install it securely in a location that does not
interfere with your driving.
Optional car accessory needed
To connect your CD player to a car cassette
deck, you need the following car accessories
in “Accessories (supplied/optional)”:
• Car battery cord, and
• Car connecting pack*
For details, see the instruction manuals that
come with the optional accessories.
* Noise may be heard if you use an optional
connecting cord. It is recommended that you use
a Sony car connecting pack to reduce noise.
Switched ignition function (when
using the car battery cord)
With this feature, your CD player stops
automatically when you turn off the car
engine (turn off the ignition key) even if the
batteries are inserted in the CD player. This
function is invalid depending on the car
models.
Note
Use only the car battery cord listed in “Accessories
(supplied/optional).” If you use any other car
battery cord, a heat, smoke or malfunction may
occur.
17
B Connecting a power source
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see “Playing a CD”)
• LR6 (size AA) alkaline batteries
Connect the AC power adaptor to
the EXT BATT/DC IN 4.5 V jack of
your CD player and an AC outlet,
then press x/CHG to start
charging.
3
For the battery life and charging time of the
rechargeable batteries, see “Specifications.”
If the AC power adaptor does not fit the
AC outlet, use the AC plug adaptor.
Using the rechargeable
batteries
x/CHG button
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
to EXT BATT/
DC IN 4.5 V
• NC-WMAA
• NH-WM2AA
Open the battery compartment lid.
1
AC power adaptor
to an AC outlet
(rear)
Insert two rechargeable batteries
2
The CD player charges the batteries. The
“CHG” indicator turns on in the display,
by matching the 3 to the diagram
in the battery compartment and
close the lid.
and the indicator sections of
light
up in succession. When the batteries are
completely charged, the “CHG” and
indicators turn off.
If you press x/CHG after the charge has
already been completed, the
indicator flashes and “Full” appears in
the display.
Disconnect the AC power adaptor.
4
18
To remove the rechargeable batteries
Note on the rechargeable batteries
Remove the batteries as illustrated below.
If the battery is new or has not been used for
a long time, it may not be charged
completely until you charge and discharge it
several times.
Note on carrying the rechargeable
batteries
Use the supplied battery carrying case to
prevent unexpected heat. If the rechargeable
batteries and the metallic objects are
contacted, heat or fire may occur due to a
short circuit.
When to charge the rechargeable
batteries
To attach the battery compartment lid
You can check the remaining power of the
batteries in the display.
If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.
Battery power is full.
r
r
Battery power is getting low.
r
r
Battery power is low.
r
Lo batt* Batteries are depleted.
* Beep sounds.
To keep the original battery capacity for a
long time, charge the batteries only when
they are completely depleted.
Notes
• The indicator sections of
roughly show the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
When to replace the rechargeable
batteries
If the battery life becomes shorter by about
half, replace the batteries with new
rechargeable batteries.
19
Using dry batteries
Use only the following dry battery type for
your CD player:
Using the battery case
(for the customers supplied with the
battery case)
• LR6 (size AA) alkaline batteries
You can extend power by inserting the
rechargeable batteries or dry batteries in the
CD player and attaching the battery case.
The batteries in the CD player and battery
case are discharged simultaneously.
Note
Be sure to remove the AC power adaptor when
using the dry batteries.
Open the battery compartment lid.
1
Remove the cap of the battery
1
case, and insert two LR6 (size AA)
alkaline batteries by matching the
3 to the diagram outside the
battery case and close the cap of
the battery case.
Insert two LR6 (size AA) batteries
by matching the 3 to the diagram
in the battery compartment.
2
To remove the batteries
Remove the batteries in the same way as
rechargeable batteries.
When to replace the batteries
You can check the remaining power of the
batteries in the display.
Battery power is full.
r
Connect the battery case to the
CD player.
2
r
Battery power is getting low.
r
r
Battery power is low.
r
to EXT BATT/
DC IN 4.5 V
Lo batt* Batteries are depleted.
* Beep sounds.
With the v side up
When the batteries are depleted, replace both
batteries with new ones.
Notes
• Be sure to remove the AC power adaptor when
attaching the battery case.
• When using the rechargeable batteries and dry
batteries together to extend power, use fully
charged rechargeable batteries and new dry
batteries.
20
Notes on the power
source
Disconnect all power sources when the CD
player is not used.
Using the carrying case
(for the customers supplied with the
battery case)
You can carry your player and its battery
case together using the supplied carrying
case.
Insert them into the proper places in the case
as illustrated below.
On AC power adaptor
• Use only the AC power adaptor supplied or
recommended in “Accessories (supplied/
optional).” Do not use any other AC power
adaptor. It may cause a malfunction.
Polarity of the plug
• When disconnecting the AC power adaptor
from the AC outlet, grasp the adaptor
itself. Do not pull it by the cord.
• Do not touch the AC power adaptor with
wet hands.
On rechargeable batteries
and dry batteries
• Do not charge the dry batteries.
• Do not throw the batteries into fire.
• Do not carry the batteries with coins or
other metallic objects. It can generate heat
if the positive and negative terminals of the
battery are accidentally contacted by a
metallic object.
• Do not mix rechargeable batteries with dry
batteries.
• Do not mix new batteries with old ones.
• Do not use different types of batteries
together.
• When the batteries are not to be used for a
long time, remove them.
• If battery leakage occurs, wipe off any
deposit in the battery compartment, and
install new batteries. In case the deposit
adheres to you, wash it off thoroughly.
21
B Additional information
On headphones/earphones
Road safety
Precautions
Do not use headphones/earphones while
driving, cycling, or operating any motorized
vehicle. It may create a traffic hazard and is
illegal in some areas. It can also be
potentially dangerous to play your headsets
at high volume while walking, especially at
pedestrian crossings. You should exercise
extreme caution or discontinue use in
potentially hazardous situations.
On safety
• Should any solid objects or liquid fall into
the CD player, unplug it and have it
checked by qualified personnel before
operating it any further.
• Do not put any foreign objects in the DC
IN 4.5 V (external power input) jack.
On the CD player
• Keep the lens on the CD player clean and
do not touch it. If you do so, the lens may
be damaged and the CD player will not
operate properly.
Preventing hearing damage
Avoid using headphones/earphones at high
volume. Hearing experts advise against
continuous, loud and extended play. If you
experience a ringing in your ears, reduce
volume or discontinue use.
• Do not put any heavy object on top of the
CD player. The CD player and the CD may
be damaged.
• Do not leave the CD player in a location
near heat sources, or in a place subject to
direct sunlight, excessive dust or sand,
moisture, rain, mechanical shock,
unleveled surface, or in a car with its
windows closed.
Consideration for others
Keep the volume at a moderate level. This
will allow you to hear outside sounds and to
be considerate to the people around you.
• If the CD player causes interference to the
radio or television reception, turn off the
CD player or move it away from the radio
or television.
Maintenance
To clean the casing
Use a soft cloth slightly moistened in water
or a mild detergent solution. Do not use
alcohol, benzine or thinner.
On handling CDs
• To keep the CD clean, handle it by its
edge. Do not touch the surface.
• Do not stick paper or tape onto the CD.
Not these ways
• Do not expose the CD to direct sunlight or
heat sources such as hot air ducts. Do not
leave the CD in a car parked under direct
sunlight.
22
Troubleshooting
Should any problem persist after you have checked these symptoms, consult your nearest Sony
dealer.
Symptom
Cause and/or corrective actions
The volume does not increase
even if you press the VOLUME
+ button repeatedly.
c
c
Set the AVLS switch to “NORM.” (page 14)
The headphones/earphones are connected to the LINE OUT
(OPTICAL) jack. Connect them to the i/REMOTE jack.
(page 7)
No sound, or noise is heard.
c
c
Connect the plugs firmly. (page 7)
Plugs are dirty. Clean the plugs with a dry soft cloth periodically.
The playing time is too short
when powered with the dry
batteries.
c
Check that you are using alkaline batteries and not manganese
batteries. (page 20)
Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 20)
c
The playing time is too short
when powered with the
rechargeable batteries.
c
Charge and discharge the rechargeable batteries several times.
(pages 18, 19)
When you press u, “ Lo
batt” or “ 00” appears in the
display. The CD does not
play.
c
c
The rechargeable batteries are used up completely. Charge the
batteries. (page 18)
Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 20)
“ HI dc In” appears in the
display.
c
c
Use only the AC power adaptor or car battery cord in “Accessories
(supplied/optional).” (page 26)
Remove all power sources, then insert the batteries or connect the
AC power adaptor again. (pages 7, 18, 19, 20)
The CD does not play or
“ no dISC” appears in the
display when a CD is placed
in the CD player.
c
c
c
The CD is dirty or defective. (page 22)
Check that the CD is inserted with the label side up. (page 7)
Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
c
Close the lid of the battery compartment firmly.
(page 18)
c
c
Make sure the batteries are inserted correctly. (pages 18 - 20)
Connect the AC power adaptor to an AC outlet securely. (page 7)
“ Hold” appears in the
display when you press a
button, and the CD does not
play.
c
The buttons are locked. Slide the HOLD switch back. (page 14)
(Continued)
23
Troubleshooting
Cause and/or corrective actions
Symptom
c
The CD player is connected to an audio device. Adjust the volume
using the volume control on the connected device. (page 16)
Cannot adjust the volume
with the VOLUME +/– buttons
on the CD player.
c
c
Record the track number again using the MiniDisc recorder, DAT
recorder, etc. (page 16)
See the instruction manual that comes with the recording device.
(page 16)
During recording with optical
digital connection, the track
number cannot be recorded
correctly.
c
During stop, press
x/CHG. (page 18)
The CD player does not start
charging.
24
• AC power adaptor (DC IN 4.5 V jack):
U2/CA2/E92/MX2 model: 120 V, 60 Hz
CED/CET/CEW/CEX/CE7/EE/EE1/E13/G5/
G6/G7/G8 model:
Specifications
System
Compact disc digital audio system
220 - 230 V, 50/60 Hz
CEK/3CE7 model: 230 - 240 V, 50 Hz
EA3 model: 110 - 240 V, 50/60 Hz
AU2 model: 240 V, 50 Hz
JE.W/E33 model: 100 - 240 V, 50/60 Hz
HK2 model: 220 V, 50/60 Hz
Laser diode properties
Material: GaAlAs
Wavelength: λ = 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
AR1/CN2 model: 220 V, 50 Hz
• Sony DCC-E245 car battery cord for use on
car battery: 4.5 V DC
Battery life* (approx. hours)
(When you use the CD player on a flat and stable
surface.)
D-A conversion
1-bit quartz time-axis control
Playing time varies depending on how the CD
player is used.
Frequency response
20 - 20,000 Hz +–21 dB (measured by EIAJ CP-
307)
Two NC-WMAA
(charged for
about 4 hours**)
11
23
Output (at 4.5 V input level)
Line output (stereo minijack)
Output level 0.7 V rms at 47 kilohms
Recommended load impedance over 10
kilohms
NH-WM2AA
(charged for
about 4 hours**)
Headphones (stereo minijack)
Approx.5 mW + Approx. 5 mW at 16 ohms
(Approx. 0.15 mW + Approx. 0.15 mW
at 16 ohms)*
*For the customers in France
Optical digital output (optical output connector)
Output level: –21 - –15 dBm
Two Sony alkaline
batteries LR6SG
37
46
Rechargeable batteries
NC-WMAA and
two alkaline batteries
Rechargeable batteries
NH-WM2AA and
two alkaline batteries
58
76
Wavelength: 630 - 690 nm at peak level
Power requirements
Two Sony alkaline
batteries LR6SG and
two Sony alkaline
batteries LR6SG
(battery case)
For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
• Two Sony NC-WMAA rechargeable
batteries: 2.4 V DC
• Sony NH-WM2AA rechargeable batteries:
2.4 V DC
• Two LR6 (size AA) batteries: 3 V DC
* Measured value by the standard of EIAJ
(Electronic Industries Association of Japan).
** Charging time varies depending on how the
rechargeable battery is used.
Operating temperature
5°C - 35°C (41°F - 95°F)
(Continued)
25
Optional accessories
Specifications
AC power adaptor
AC-E45HG
Active speaker system
SRS-Z1
SRS-Z1000
Dimensions (w/h/d) (excluding
projecting parts and controls)
Approx. 131.5 × 22.5 × 141.4 mm
(5 1⁄4 × 29⁄32 × 5 5⁄8 in.)
Car battery cord
DCC-E245
Car battery cord with car connecting pack
DCC-E26CP
Mass (excluding rechargeable
batteries)
Approx. 200 g (7.1 oz.)
Car connecting pack
Connecting cord
CPA-9
RK-G129HG
RK-G136HG
Design and specifications are subject to change
without notice.
Optical digital connecting cord
POC-5B
POC-10B
POC-15B
POC-5AB
POC-10AB
POC-15AB
Accessories
(supplied/optional)
Supplied accessories
Rechargeable battery
Earphones
NH-WM2AA
For the area code of the location in which you
purchased the CD player, check the upper left side
of the bar code on the package.
MDR-E848LP
MDR-EX70LP
AC power adaptor (1)
Headphones/earphones with remote control (1)
Rechargeable batteries (2)
Battery carrying case (1)
Carrying case (1)
Battery case (1)*
AC plug adaptor (1)**
When connecting optional
headphones/earphones to the
supplied remote control
Use only headphones with stereo mini plugs.
You cannot use headphones with micro
plugs.
*
Supplied with U2, CED, G8, CEK and CEX
models
** Supplied with JE.W and E33 models
For US customers
The AC power adaptor supplied is not intended to
be serviced. Should the AC power adaptor cease to
function in its intended manner, during the warranty
period, the adaptor should be returned to your
nearest Sony Service Center or Sony Authorized
Repair Center for replacement, or after warranty
period, it should be discarded.
Stereo miniplug
Micro plug
Your dealer may not handle some of the
above listed accessories. Please ask the
dealer for detailed information about the
accessories in your country.
26
Sony Corporation Printed in Malaysia
|