POWER SUPPLY
Reliable 250 Watt Replacement ATX
Power Supply
ATXPOWER250
ATXPOWR250GB
Instruction Guide
* ATXPOWER250 shown
* Actual product may vary from photo
Revised: May 27, 2004
The Professionals’ Source For Hard-to-Find Computer Parts
1
4
Product Specifications
Table of Contents
Dimensions
Weight
5.9 x 3.35 x 5.87 inches (150 x 85 x 149mm)
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ATXPOWER250: 2.88 lbs (1.3 kg)
ATXPOWR250GB: 3.69 lbs (1.65 kg)
Input Voltage
Output Power
Connectors
115/ 230V
250W
4 x 4-pin-LP4-female
1 x small-internal-power
1 x 20-pin-ATX-motherboard-adapter
1 x 4-pin extended ATX power 12V plug and Aux
plug for Pentium 4
MTBF
100,000 Hours @ 25 Deg. C.
TUV, UL, CSA, CE, FCC, CB
Safety Approvals
AC INPUT
Voltage 115V~ Current 7A
Voltage 230V~ Current 4A
Frequency 50~60Hz
DC OUTPUT
+3.3V(20A)
+5V(25A)
+12V(13A)
-5V(0.5A)
-12V(0.8A)
+5VSB(2.0A)
2
3
Introduction
Installation
Thank you for buying a StarTech.com 250-Watt replacement power supply. The
ATXPOWER250 and ATXPOWR250GB are guaranteed compatible with Intel and AMD
processors and designed for an extra long-life in personal and industrial computers. This
power supply ensures stable system performance and uses an automatic temperature
control fan to maintain an optimal operating environment for heat-sensitive components.
ATXPOWER250 users: Check the red power supply voltage switch before installation. It
should be the same as your local power voltage. Change the voltage setting if necessary.
ATXPOWR250GB users: The power supply will automatically detect and set the proper
voltage setting.
1. Make sure that your system is turned off and unplugged. Disconnect the power cord
from your old power supply.
Features
•
•
•
•
•
•
Ideal for Intel and AMD processors
2. Open the case (consult your computer’s user guide for details, if necessary).
Provides extra power capacity for PC servers with several hard drives
Provides the extra current required by 1 GHz and faster CPUs
Provides the extra power required by leading edge 3D video accelerator cards
Provides extra current and power capacity for overclocking CPUs
NOTE: Before completing the next step, you may want to take note of what devices are
attached to your current power supply so you know which devices need to be connected
to the new power supply and where their connectors are located.
3. Disconnect all power connectors from the motherboard and the peripheral
devices such as hard drives, floppy disks, etc. Make sure that there are no devices
connected to your existing power supply.
Automatically detects temperature and adjusts fan speed to maintain optimal
performance
4. Remove the existing power supply from your computer case and replace it with the
new StarTech.com power supply.
•
•
•
Complies with ATX version 2.03 standards
Rear power cut-off switch
5. Connect the power connectors to your motherboard and peripheral devices.
6. Close your computer case.
Backed by StarTech.com’s two-year warranty
7. Connect the power cord to the StarTech.com power supply.
WARNING! Computer parts can be severely damaged by static electricity. Be sure that
you are properly grounded before opening your computer case. StarTech.com
recommends that you wear an anti-static strap when installing any computer
component. If an anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the computer
case) for several seconds. Also make sure that your computer is turned off and
unplugged before attempting to open your computer case.
ATXPOWER250/ATXPOWR250GB Connectors
Contents
This package should contain:
•
•
1 x ATXPOWER250 or ATXPOWR250GB power supply
1 x power cord
|